a high quality, maximum strength ionic calcium solution designed to safely raise the calcium level in marine aquariums
providing essential calcium for increased growth rates in corals, coraline algae, crustaceans and many other marine organisms
It contains no acetate, gluconates, polygluconates or other unnecessary organics to pollute your aquarium
phosphate and silicate free
may be used simultaneously with Kalkwasser
Use in aquarium keeping
Proper control of calcium level is imperative for the health and growth of corals and many other invertebrates.
If the calcium concentration is too low, growth rates will suffer.
If it is too high, alkalinity or buffering capacity will be diminished, leading to possible instability of pH.
Sufficient magnesium levels are also necessary to maintain the proper balance. It is therefore recommended that the hobbyist measure and control the levels of calcium, magnesium and alkalinity on a regular basis.
Strontium is also required for formation of aragonite.
Continuum recommends that you maintain a calcium level of between 410 and 450 mg/L (ppm), an alkalinity level of 7 to 11 dKH (2.5 to 4 meq/L), and a magnesium level of 1250 to 1350 mg/L (ppm).
Note: Aquarists keeping SPS corals should consider keeping alkalinity at 7 to no more than 9 dKH (2.5 to 3.21 meq/L). Do not add calcium and buffering (alkalinity) products at the same time. Doing so will cause unnecessary precipitation and possible cloudiness.
Directions
Shake well prior to use.
Add 1 capful (5 ml) per 50 US-gallons (200 L) of marine aquarium water 3 to 4 times per week.
For best results, measure the calcium concentration and add as required to maintain the concentration between 410 and 450 mg/L.
Expert use
Dosing through use of a drip system is a superior method of addition.
Do not mix with buffers or alkalinity supplements prior to addition.
You may mix it with strontium, magnesium, and many other supplements.